Heating and Plumbing Warehouse

Standard Horizontal Telescopic Flue Kit for Intergas boilers.

Suitable only for the new low profile Intergas boilers.

The 60/100mm horizontal flue system may be extended to a maximum of length of 10 metres however, for every 45° bend used, the flue length should be reduced by 1 metre. For every 90° bend used, the flue length should be reduced by 1.5 metres.

All horizontal flues must be installed with a 3° fall back towards the boiler. For example, for every 1000mm of flue, there should be a fall of 50mm and must be supported by a minimum of 1 bracket per 1000mm, ideally positioned just before the joint.

The kit includes:
• straight telescopic flue (extendable up to 600mm)
• low profile elbow
• 2 rubber collars

Customer Reviews

Write an online review and share your thoughts with other shoppers!

Be the first to review this product